Analytical Laboratory Benchtop Instrument

Product Details:

• Designed to protect electronics from acid / alkali wet area & heat zone
• Independent loading of sample with individual mechanical controls
• Auto acoustic alarm on completion of process
• Auto power off mode on completion of process
• Inbuilt safety features like auto error indication, auto over temperature protection and auto sensor break protection
• PC chart Software Performs Live Graphical Representation of Time/ Temperature Gradient on PC Connectivity

Product Details:

• The control panel unit along with inbuilt temperature controller, timer, mother board and SMPS is be isolated in separate control tower and housing to protect electronics from wet chemistry & acid/ alkali process area for longevity and safety of all electronic components.
• Water in the scrubber tank is drained and filled automatically every time at the end of digestion thereby draining the water for every consecutive cycle.
• Manual drain of water from the scrubber tank is also provided.
• A separate distilled water line to the steam generator.
• Auto refilling of distilled water to the steam generator is provided by using a proximity sensor.
• Monitoring of boiler water level from outside.
• Users choice to choose independent or combined operation of digestion and distillation.
• Inbuilt safety from Over voltage

Product Details:

1. ake off the protective cap from the metal probe
2. Press OFF/ON button Tester display “0″.
3. Quick testing: Water the soil with distilled water before testing. Make sure the water can go 10 cm deep at the least. The best humidity is 60%-80%. Insert the metal probe into the soil vertically and clockwise, to about 6-8 cm deep. Make sure the soil have thorough contact with the metal probe. After about 6 seconds, the tester will display the measured value. The tightness of soil will affect the measuring result. Multiple tests at the same and different points should be performed and take the average as the Final result.
   Accurate testing: use a container, mix dried water at the rate of 3:1. Stir and make it into a mud form. Put the metal probe into the mud about 6-8 cm deep. In about 6 seconds, the tester will display the measured value.
4. Wipe the metal probe with a towel or tissue paper after each test. Make it clean and dry. till the display shows “0″.

Product Details:

The first Centrifuge was invented by an English Military Engineer named Benjamin Robins, who proposed the whirling arm apparatus. Later in 1864, Antonin Prandtl fabricated the design and its working. Further, in 1875, his brother Alexander Prandtl made improvements to ensure the unit’s smooth functioning. 

Product Details:

• Efficient Rolling and swinging motion for mixing blood samples, Liquid solid suspension & various substance
• Digital set-up for RPM & time with independent LED display
• Maximum rolling speed upto 80RPM
• Seven rollers with small foot print & easy cleaning
• Brushless DC motor
• Compatible for use with wide range of tubes
• Used for prevention of blood coagulation and immune precipitation etc

Product Details:

• Environment friendly & suitability
• One Touch Use, Fully Automatic ,
• Intelligent, dual stage all glass type
• Fully automatic control save energy & money– By setting the required output volume in litters. Aer completion of the process heater is turned off and the cooling water inlet is closed automatically.
• Boiler empty detection intelligence built in– when the water level inside the boiler drops below the heater, boiler empty condition is detected.
• Gate Valve to one side – Conserves cooling water wastage in case of power failure
• Flow switch – In built safety feature for the equipment unit shut off in case of cooling water failure. When the inlet water flow to the unit is low, this error is displayed with buzzer indication. The process in paused until the inlet flow is resumed.
• Easy to read Alpha numeric LCD and keypad for all settings and messages that correspond to the running of the machine.
• Auto cleaning detection
• Probe error detection
• So Calibration of output volume to compensate seasonal temperature and flow rate changes
• Manual overriding flow sensor and Gate (solenoid) valve
• Serviceability Replaceable Silica sheathed (Quartz) Heater
• Safety of user & instrument against wattage/power variation

Product Details:

A Mini Shaker is an instrument used to mix liquids in small vessels or tubes with the help of adaptors. This instrument has the possibility to fix adaptors for assisting the use of a microtiter plate, selective tubes in soft adapters which helps in easy shaking movement of the liquid in tubes in the attachments. 

 

Features 

1. Orbital Movement 
2. Vortex movements also possible
3. LED Display for clear visibility
4. Compact Design 
5. Speed Stability 
6. Continuous and One Shot Operation 
7. Choice of menus 

Product Details:

• With spring loaded safety valve with Pressure adjustment,
• Dead weight safety valve, steam release valve
• Pressure gauge 63mm dia
• 8 knobs inner chamber & tripod stand

Product Details:

• Outer chamber and lid made of Stainless steel.
• Double walled with boiler & steam jacket.
• Gap is filled high grade glass wool.
• Neoprene rubber gasket by wing nut.
• Hinged bolts on rim of the cover.
• Provided with wing nut, dial pressure gauge,
• Air/Steam Cock.
• Water level indicator.
• Sprint loaded safety valve

Product Details:

• hree independently controlled stirring/heating positions.
• Powerful magnets for strong magnetic coupling
• Easy temperature & Stir controls.
• Installed with Safety PT sensor for fail safe operation.
• LED hot top indicator for temperatures above 50°C for each station.
• Electronic variable speed control with Knob for display
• Knob for regulating variable temperature
• Heat reach Indicator, To ensure you correct temperature of plate surface.
• Stirring Indicator
• LED error code displays & safety for heat & Stir function inbuilt trouble shoot

Product Details:

Easy temperature & Stir controls
Installed with Safety PT sensor for fail safe operation.
Hot top indicator for temperatures above 50°C.
Large top plate to assist beakers upto 2000 ml.
High magnetic strength.
Electronic variable speed control with Knob for display.
Knob for regulating variable temperature.
Heat reach Indicator, To ensure you correct temperature of plate surface.
Stirring & temperature indicator
Error indicators for heat & Stir function inbuilt trouble shoot
Hot top warning indicator for temperature >50°C

Technical Specifications
Heating Mantle Material : Steel/Ceramic Coated
Dimension of heating plate : 150 Ø
Speed Range : 50-1700 RPM
Maximum stirring bar length : Can use upto 80mm bar
(at lower speed)
Temperature Range : Ambient to 350°C approx
Dimensions of hot plate body : 273x160x102mm
Weight of body : 2.8 kgs
Permissible Ambient Temperature : 5- 40 °C
Permissible relative moisture : 80%
IP Class : 22
Also Known as : 700.AG.01

Category: Hotplate with Magnetic Stirrer

Product Details:

• Aluminium Moulded Construction
• Ceramic coated plate alloy, chemically resistant
• Chemically resistant keypad
• Even heat distribution at faster rate.
• Thermal insulation for cool body operation.
• Digital set up temperature controller with independent LED display.
• Set safety cut-off for maximum temperature limit for top plate or probe.
• Installed with double PT sensors for fail safe operating mechanism.
• Hot top indicator for temperature above 50°C even when switched off.
• Inclusive PT 100 temperature sensors probe.
• Audible alarm at time cycle end for safety and ease of unsupervised operation.
• Top plate Ø 145 mm to assist beaker upto 2000 ml & Adapter.
• Compatible for use with all major brands top assemblies 1 Cavity, 3 Cavities or Multiple Cavities.
• Digital setup of time with independent LED display.
• Selection of plate and probe temperature.
• Error code display at failures
• Digital setup of RPM with independent LED diplay.
• Count-up indication of minutes and hours.
• Single multi-turn intelligent knob Operation.
• Selection of Celsius and Fahrenheit.
• High magnetic strength.

Product Details:

• Aluminium Moulded Construction
• Easy temperature & Stir controls
• Installed with Safety PT sensor for fail safe operation.
• Hot top indicator for temperatures above 50°C.
• Large top plate to assist beakers upto 2000 ml.
• High magnetic strength.
• Electronic variable speed control with Knob for display.
• Knob for regulating variable temperature.
• Heat reach Indicator, To ensure you correct temperature of plate surface.
• Stirring & temperature indicator
• Error indicators for heat & Stir function inbuilt trouble shoot
• Hot top warning indicator for temperature >50°C

Product Details:

• Independent control for heating & stirring
• Powerful 1300 W heater, biggest in class, gives results quickly.
• Supplied with Accessories, Probe based thermal control best for direct media temperature control.
• 7X7 inch Glass Cera top supports large vessels upto 5 Ltr.
• Pt1000 for higher accuracy

Product Details:

DAN Logitech’s glass ceramic top digital magnetic stirrer with hotplate (500 DNAG) comes with Cera-click System. It can assist a beaker of upto 5000 ml. There is a selection of Celsius and Fahrenheit for hot plate and probe temperature differently. It has an independent display for RPM and temperature. The ceramic plate in this type is easily replaceable and has thermal insulation for cool body operation.

Product Details:

• Powerful 650W Heater Heat Evenly, rapidly & given result quickly
• PU Coated Aluminium Alloy Moulded Construction
• Auto Power “ON” possible
• Chemically resistant keypad
• Even heat distribution at faster rate
• Thermal insulation for cool body operation
• Digital set up temperature controller with independent LED display
• Set safety cut-off for maximum temperature limit for top plate or probe
• Installed with double PT sensors for fail safe operating mechanism
• Only with Battery for domestic
• Inclusive PT 100 temperature sensor probe
• Audible alarm at time cycle end for safety and ease of unsupervised operation
• Top plate Ø 145 mm to assist beaker upto 2000 ml & Adapter.
• Compatible for use with all major brands top assemblies 1 Cavity, 3 Cavities or Multiple Cavities
• Digital setup of time with independent LED display
• Selection of plate and probe temperature
• Error code display for failures
• Digital setup of RPM with independent LED diplay
• Count-up indication of minutes and hours
• Single multi-turn intelligent knob Operation
• Selection of Celsius and Fahrenheit
• High magnetic strength

Product Details:

( WITH LABS-CONNECT™ )

CeraClick-System™

• Powerful 1300 W heater, biggest in class, gives results quickly.
• Supplied with Accessories, Probe based thermal control best for direct media temperature control, pH electrode for pH based alarms.
• 7X7 inch Glass Cera top supports large vessels upto 5 Ltr.
• CERA click quick removal of top plate.
• WIFI variant adds value labs connect useful for private non pharma labs.

RELIABILITY

• Hot Top warning, UL/CSA certified, very safe for users.
• Precise, microcontroller-based temperature control in both C & F
• Indicates errors automatically in Display.
• Interface easy to use and rugged against spillages. Patented spill away design

DURABILITY

• PU coated body, made from AL Alloy gives infinite rust/damage free life.
• Can carry 20 KG weight. Rugged Motor withstands all voltage fluctuations.

SERVICEABILITY & SUPPORT

• Patented CeraClick system for quick service.
• Made in India… Tech support and Spares readily supported.
• Low down times. Value for investment

Product Details:

• Powerful 1300 W heater, biggest in class, gives results quickly.
• Supplied with Accessories, Probe based thermal control best for direct media temperature control.
• 7X7 inch Glass Cera top supports large vessels upto 5 Ltr.
• Pt1000 for higher accuracy.
• Automatic device control mode.
• Temperature reach alarms.
• Timer/Counter option.
• Continous stir on or off option.

Product Details:

• WIFI variant adds value Labs-Connect useful for private non pharma labs.
• Powerful 1300 W heater, biggest in class, gives results quickly.
• Supplied with Accessories, Probe based thermal control best for direct media temperature control, pH electrode for pH based alarms.
• 7X7 inch Glass Cera top supports large vessels upto 5 Ltr.
• CERA click quick removal of top plate
• Lock Key on panel for settings lock
• Pt1000 for higher accuracy
• Separate PID/Heating mode selection

Product Details:

• PU Coated Aluminium Alloy Moulded Construction
• Easy temperature & Stir controls
• Installed with Safety PT sensor for fail safe operation.
• Hot top indicator for temperatures above 50°C.
• Large top plate to assist beakers upto 2000 ml.
• High magnetic strength.
• Electronic variable speed control with Knob for display.
• Knob for regulating variable temperature.
• Heat reach Indicator, To ensure you correct temperature of plate surface.
• Stirring & temperature indicator
• Error indicators for heat & Stir function inbuilt trouble shoot

Product Details:

• Compact design
• Available with Flat platform
• BLDC motor driven
• Microprocessor controlled
• User-Friendly
• Application in molecular biology, immunology, chemistry lab
• Low power consumption
• Maximum stirring speed upto 300RPM
• Digital set up of RPM and time with independent LED display
• Audible alarm at time cycle end for safety and ease of unsupervised operation
• Silent and stable operation
• Compatible for use with various capacity conical flasks and different sample containers.

Product Details:

• Standalone housing for Temperature controller to protect electronics from solvent area & heat zone.
• PC chart software performs Live graphical representation of time/temperature gradient on PC Connectivity
• Auto Alarm for recovery phase
• Auto power off mode on completion of extraction.
• Independent loading of sample with individual mechanical controls.
• Inbuilt safety features like auto error indication, auto over temperature protection and auto sensor break protection.
• Cold water line for condensation of solvent with silicon hose interconnection for condensor

Product Details:

Orbital Incubator Shaker with Cooling

1. Home
2. Products
3. Analytical Laboratory Benchtop Instruments
4. Incubator Shaker
5. Lab Shakers
6. Orbital Incubator Shaker with Cooling

Orbital Incubator Shaker with CoolingIncubator Shaker   Introduction

 

A combination of mixing and incubating the liquids at the same time is termed as an incubator shaker. It is one of the four shakers which is ideal for heating, cooling, shaking, and homogenizing liquid matter with uniform temperature distribution. Cell Cultures are generally prepared in incubator shakers, also known as Thermal Shaker. 

The incubator shaker is a box-like container that heats, cools, shakes, and mixes the vessel’s liquids. The largest incubator can hold a capacity of 2 liters to 115 liters. 

Evolution of Incubator Shaker 

The first incubators were invented in the early 1800s which were termed “air-jacketed” incubators. Later, during the year 1960, commercial incubators with CO2 were developed. Furthermore, in the year 2001, the combination of incubator and mixing was enhanced by incubator shakers.

   Features | Used For | Challenges DAN Logitech’s Incubator Shaker (3900.DNEU.01) Glassware compatible with DAN Logitech’s Incubator Shaker Comparison with other countries

Features:

• Compact design
• Available with Flat platform
• BLDC motor driven
• Microprocessor controlled
• User-Friendly
• Application in molecular biology, immunology, chemistry lab
• Low power consumption
• Maximum stirring speed upto 300RPM
• Digital set up of RPM and time with independent LED display
• Audible alarm at time cycle end for safety and ease of unsupervised operation
• Silent and stable operation
• Compatible for use with various capacity conical flasks and different sample containers.

Product Details:

• Compact design
• Available with Flat platform (Cat. No. 3500.303.01)
• Built in DC brushless motor
• Microprocessor controlled
• User-Friendly
• Application in molecular biology, immunology, chemistry lab
• Low consumption
• Maximum stirring speed upto 300RPM
• Digital set up of RPM and me with independent LED display
• Audible alarm at me cycle end for safety and ease of unsupervised operation
• Silent and stable operation

Product Details:

• Cost – effective and user friendly apparatus for hot extraction.
• Energy individually adjustable for every sample position.
• Cooling water distribution, strips ensures uniform cooling at sample positions.
• Practical condenser ledge to safely deposit the condenser between hot extractions.
• Brackets for safely holding the intermediate extraction pieces after removing the sample container
• Material of construcon of adaptors is SS 304 Grade

Product Details:

• PU coated aluminium alloy body construction ensures durability
• Interchangeable aluminum alloy sample blocks provide versatility and allow for easy cleaning and disinfecting
• Precise temperature control with PID circuit
• Digital controls and display of time and temperature
• Built-in temperature sensing probe for outstanding temperature accuracy and control
• Timer allows the user to accurately monitor the heating time

Product Details:

• Temperature Uniformity- ± 1°C
• Temperature sensor- PT-100
• Temperature Controller
• PID temperature controller
• LED display of SV & PV
• Construction- Double walled with PUF Insulation
• Inner Construction- Stainless Steel 304 grade
• Exterior Construction- Powder Coated GI sheet
• Exterior Door- Solid door with lock & key
• Inner door- Glass door to view samples
• Trays- Stainless steel preforated trays
• Interior illumination- LED Light
• Heating Element- U-shaped SS tubular heaters
• Refrigeration System- CFC Free Compressor
• Air Circulation- Motorized Blower / Axial fan
• Safety- Temperature High / Low alarm
• Door open buzzer
• Caster wheels with brake
• With Test Certificate

Product Details:

• Robust Metallic Construction
• Designed for synchronous heating and stirring
• Suitable for continuous unsupervised operation
• Silicone mat for anti-skid.
• The magnetic coil motorless technology provides noiseless and consistent stirring on all positions
• Homogeneous temperature distribution across the heating plate
• Hot top warning indication
• Timer function
• Multiple modes with mode selection key
• Constant stirring speeds even with viscosity changes
• SPC-mode for a low self-warming of the surface
• Error codes display

Product Details:

• Robust Metallic Construction
• Simultaneously operating stirrers
• Consistent heating and stirring
• Silicone mat for anti-skid
• Homogeneous temperature distribution across the heating plate
• Narrow foot print for space saving
• High magnetic strength
• Knob for electronic variable speed adjustment
• Knob for electronic variable temperature adjustment
• BLDC motor for smooth drive

Product Details:

• Three independently controlled stirring/heating positions.
• Powerful magnets for strong magnetic coupling
• Easy temperature & Stir controls.
• Installed with Safety PT sensor for fail safe operation.
• LED hot top indicator for temperatures above 50°C for each station.
• Electronic variable speed control with Knob for display
• Knob for regulating variable temperature
• Heat reach Indicator, To ensure you correct temperature of plate surface.
• Stirring Indicator
• LED error code displays & safety for heat & Stir function inbuilt trouble shoot

Product Details:

• Robust Metallic Construction
• Suitable for continuous unsupervised operation
• Designed for synchronous heating and stirring
• The magnetic coil motorless technology provides noiseless and consistent stirring on all positions
• Homogeneous temperature distribution across the heating plate
• Hot top warning indication
• Timer function
• Adjustable reverse operation for stirring
• Stirring speed remains constant, even when load changes
• SPC-mode for a low self-warming of the surface
• Multiple opening modes selection
• Error codes display
• Continuous stir modes possible
• Can be operated with Labs-connect App over Wifi/USB Controls

Product Details:

• Large display allow viewing from distance
• Powerful magnet stirrer large volume
• Acceleration adjust for volume & viscosity combination
• Auto power ‘ON’ possible
• Detachable wire & wireless remote add value for placing under large vessel
• SS 304 construction
• Large surface to assist large vessels upto 20, 30 40 & 50L
• High magnetic strength
• Electronic variable speed control
• Independent display for RPM & Time
• Choice of 7 modes of rotation
• Power adjust feature

Product Details:

• Aluminium Moulded Construction
• Easy Stir controls
• Large top plate to assist beakers upto 5000 ml.
• Maximum stirring speed upto 1600 RPM.
• High magnetic strength.
• Knob for electronic variable speed control with display
• Stirring Indicator.
• Error displays & safety for Stir function built in.

Product Details:

• Aluminium Moulded Construction
• Easy Stir controls
• Large top plate to assist beakers upto 2000 ml.
• Maximum stirring speed upto 1600 RPM.
• High magnetic strength.
• Knob for electronic variable speed control with display
• Stirring Indicator.
• Error displays & safety for Stir function built in.

Product Details:

1. Take off the protective cap from the metal probe
2. Press OFF/ON button Tester display “0″.
3. Quick testing: Water the soil with distilled water before testing. Make sure the water can go 10 cm deep at the least. The best humidity is 60%-80%. Insert the metal probe into the soil vertically and clockwise, to about 6-8 cm deep. Make sure the soil have thorough contact with the metal probe. After about 6 seconds, the tester will display the measured value. The tightness of soil will affect the measuring result. Multiple tests at the same and different points should be performed and take the average as the final result.
   Accurate testing: Use a container, mix dried soil with distilled water at the rate of 10:1. Stir and make it into a mud form. Put the metal probe into the mud about 6-8CM deep. In about 6 seconds, the tester will display the measured value.
4. Wipe the metal probe with a towel or tissue paper after each test. Make it clean and dry. till the display shows “0″.

Product Details:

for Soil tesƟng

The tester features with innovative nanotechnology metal material sensor, for fast and easy test of pH value of soil, fruit, meat, cheese and other semi-solid media.

Operating Instruction

1. Take off the protective cap from metal probe
2. Press OFF/ON button. Tester displays “7.00”.
3. Insert the metal probe vertically into the sample that requires testing, at least 6-8cm deep. Make sure there is close contact(Soil need to humid~60%-80%). The tester will start testing automatically. After about 1 minute the test is over. Indication light will be on for about 10 seconds. The displayed number is locked, which is the value of pH.
4. After each test, take out the tester, wipe the metal probe clean with towel or tissue paper. Display will be unlocked, and show “7.00″. It is ready for a newtest.
5. After use, wipe the metal probe clean until it displays “7.00”. Switch off the tester.

Product Details:

• Robust Metallic Construction
• Suitable for continuous unsupervised operation
• Designed for synchronous heating and stirring
• The magnetic coil motorless technology provides noiseless and consistent stirring on all positions
• Homogeneous temperature distribution across the heating plate
• Hot top warning indication
• Timer function
• Adjustable reverse operation for stirring
• Stirring speed remains constant, even when load changes
• SPC-mode for a low self-warming of the surface
• Multiple opening modes selection
• Error codes display
• Continuous stir modes possible
• Can be operated with Labs-connect App over Wifi/USB Controls

Product Details:

• Robust Metallic Construction
• Designed for synchronous heating and stirring
• Suitable for continuous unsupervised operation
• Silicone mat for anti-skid.
• The magnetic coil motorless technology provides noiseless and consistent stirring on all positions
• Homogeneous temperature distribution across the heating plate
• Hot top warning indication
• Timer function
• Multiple modes with mode selection key
• Constant stirring speeds even with viscosity changes
• SPC-mode for a low self-warming of the surface
• Error codes display

Product Details:

• Robust Metallic Construction
• Simultaneously operating stirrers
• Consistent heating and stirring
• Silicone mat for anti-skid
• Homogeneous temperature distribution across the heating plate
• Narrow foot print for space saving
• High magnetic strength
• Knob for electronic variable speed adjustment
• Knob for electronic variable temperature adjustment
• BLDC motor for smooth drive

Product Details:

• Stainless steel insert rack to handle.
• COD Digestion tubes.
• MS rack to keep Air condensers.
• MS rack with hole to place insert rack with tubes for adding reagents in water.
• Stainless steel water tank.